Mounting speed of various
components(resistance,capacitance,chip)20000 pcs/h.
The operation manual of the current version is applicable to all
models of intelligent software
after 2018. Operators should read the manual carefully before using
the equipment, and
understand the instructions and precautions to ensure safe
production. Wish you a happy work!
Place SMT machine and other production line equipment according to
production line plan.
Install the alarm light, adjust the footing, install the machine
cover, front and rear handles,
computer support, keyboard support (screws are in the equipment
installation hole), find the
power line from the accessory box to access 220V AC (must be
reliably grounded
Pick And Place Machine , Chip Mounter Surface Mounter , Smt Machine
The degree of manual involvement in the proce-ss of programming is
less than 15%, most of the work is undertaken by the software part
of the machine and completed automatically.
porduct description
The HW-T8-80F is our most popular model with Vision. The HW-T8-80F
offers technologically advanced features with 260mm x 400mm work
area, 50 single feeder positions (up to 120 feeders using bank
feeders) where quick setup, easy of operation and high reliability
are paramount.
ComponentsThe HW vision System assist allows accurate placement of 0201, BGA,
QFN, QFP,LED and a wide range of virtually all SMT components.
Vision System
The HW-series vision pick and place systems is easy to programming
for all operators, Intelligent and fast to operation
Feeders
Yamaha Pneumatic feeder and Electricial feeder were adopted, sizes
include 8mm, 12mm, 16mm, 24 mm, 32mm and 44mm.
| |
| Number of Placement Heads | 8(high-accuracy) |
| Number of IC Trays | 96 |
| Number of Feeders | 120(subject to 8mm feeder) |
| Positioning Accuracy | 0.01mm |
| Repeated Mounting Accuracy | 0.05mm |
| Mounting speed range of resistance | 20000-26000Pcs/h capacitance components |
| Applicable Components | resistor,capacitor,chip,lamp bead 0201-30*30mm etc. |
| Supported Maximum Area of PCB | 50*50mm--340*330mm |
| Feeders | NXTelectric feeder,vibrating feeder, IC tray etc. |
| Recognition Devices | mark camera x2,fast recognition camera x8, high-precision camera x1 |
| Maximum Height of Applicable Components | ≤20mm |
| Recognition Methods | simultaneous recognition with eight heads |
| PCB Convey Mode | three-stage entry,automatic connection from left to right,
automatic PCB positioning |
| Mark Positioning | manual / automatic |
| Programming Method | automatic programming after manually importing files of PCB
coordinates |
| Control System | HuaweiGuochuang 2021 control system |
| Maximum Step Length of XY Axis | 423mm*734mm(left) 423mm*734mm(right) |
| Tracks of XY Axis | linear motion guide + Screw driver |
| Motion Mode of XY Axis | intelligent linkage of acceleration and deceleration of curve and
line, integrated linear interpolation algorithm. |
